Data sheet EMU 32.x7 5AA.bmp){kind=small}
The multifunctional 3-phase Energy Meter EMU32.x7 for direct connection (63A).
Price per kWh can be programmed by two buttons. Total costs are shown for tariff 1 and tariff 2.
Two S0 impulse outputs for Active Energy and Reactive Energy with 10 Impulses per kWh resp. kvarh are standard.
| Display data, 6 digits + 1 decimal position 000000.0 kWh, 8 x 4,5mm | ||||
|---|---|---|---|---|
∑ |
per phase |
Tariff 1 |
Tariff 2 |
|
| Active energy (kWh) | X |
X |
||
| Price per kWh | X |
X |
||
| Total Cost | X |
X |
X |
|
| Apparent energy (VAh) | X |
X |
X |
X |
| Reactive energy (kvarh) | X |
X |
||
| Active power (W) | X |
X |
||
| Current (A) | X |
X |
||
| Voltage (V) L-N | X |
|||
| Reactive power (var) | X |
X |
||
| Apparent power (VA) | X |
X |
||
| Netfrequency (Hz) | X |
|||
| Power factor (CosPhi) | X |
|||
| Active powers-Max. | X |
X |
||
| Running Max. Active powers | X |
|||
| Measuring period in Minutes * | X |
* Measuring period is adjustable, 5, 10, 15, 30, 60 Min.
| Nominal voltage Un | 3 x 230/400V +/- 20% 3 x 127/220V +/- 20% 3 x 63 / 110V +/- 20% |
|
| Nominal (Maximum) Current: | 5 (63) A | |
| Measuring range: | 0.025 to 63 A | |
| Operating net frequency fn: | 45 – 65 Hz | |
| Meter burden: | < 0.8 W / Phase | |
| Accuracy class: | 2 according IEC 1036 | |
| Operating Temperature range: | -10 ºC to 50 ºC | |
| Storage Temperature range: | -40 ºC to +70 ºC | |
| Terminal dimensions: | 7 x 8 mm | |
| Approval: | PTB (Germany) | |
| Tariff control | 230 VAC | |
| Tariff 2 active: | Voltage applied | |
| Weight: | ca. 320g | |
| Installation: | DIN BAR 35mm | |
In conformity with CE and IEC1036 |
||
| For current transformer connection: | |
|---|---|
| Same data as for direct connection | |
| CT connection /5A or /1A | |
| CT ratio adjustable from 5/5A to 1275/5A in steps of 5A. >1275A ex factory | |
| Measuring range: | 0.005 bis 6A |
| Starting current | <5 mA |
| Accuracy class | 1 (+/- 1%) |
| Optional read-out interface: | |
| M-Bus, EIB, RS485, IEC 61107 | |
| M-Bus read-out data: | |
| Active energy Tariff1 (Wh) Active energy Tariff 2 (Wh) Reactive energy Tariff 1 (varh) Reactive energy Tariff 2 (varh) Instant. Current (A) per phase Instant. Voltage (V) per phase Instant. Active power (W) per phase Instant. Reactive power (var) per phase Instant. Power factor (Cos-Phi) per phase Instant. Netfrequency (Hz) 15min Max. Active power Tarif 1 (W) 15min Max. Active power Tarif 2 (W) Number of power failures Operating hours |
|
| EIB KNX read-out data: | |
| Active energy Tarif 1 (Wh) Active energy Tarif 2 (Wh) Instant. Active power Phase L1 (W) Instant. Active power Phase L2 (W) Instant. Active power Phase L3 (W) |
|
Subject to change without notice