Serial Device Server for Ethernet
The "Serial Device Server" allows the connection of all devices with an RS232 communication interface to the 10BaseT Ethernet. The converter is simply plugged to the serial port of the device and connected to the LAN (local area network). If the local network supports a direct link to the Internet, you can even access the M-Bus data from any place in the world.
The "Serial Device Server" is well suited for reading M-Bus systems. The included driver for Windows emu-lates a virtual, serial port on the PC and transmits the data in the network. Thus the existing software can still be used for communication.

Functionality of the converter
The Serial Device Server converts the physical interface Ethernet 10BaseT to RS232C and the proto-col TCP/IP to the serial V24 protocol. This makes an easiest integration of our M-Bus Level Conver-ters and Centrals into the Ethernet possible. You can also access the M-Bus meter from several net-work PC´s without problems.
After installation of the driver at the PC you can furthermore use your existing software for RS232C interfaces. This driver simulates a virtual serial COM port in Windows.
Our software ReadEn, Dokom CS and FService also support a direct readout of our intelligent centrals and dataloggers by TCP/IP protocol without use of the driver.

Technische Daten TCP/IP-Konverter
Connects serial devices to the Ethernet Converts 10BaseT to RS232 Network protocols: TCP/IP, UDP/IP,... RS232: independent of protocol / transparent For M-Bus Level Converters and Centrals Windows driver for virtual COM-Port Go on using your RS232-software Power supply 12VDC, 150mA Wallmounted with velcro tape Housing: B x L x H = 57 x 95 x 30 Weight: 170g

Bestellinformation:
Serial Device Server with driver software
Plug-In power supply, Patch cable and RS232C cable for M-Bus
EMU Part..Nr.: 940051